Air Venturi Carbon Fiber Tank 300DiN Valve- 4500 psi/98 cu ft

This high-pressure tank can be filled at a scuba shop through the female quick-disconnect at the end of the air line or by removing the air line completely to reveal the 300 DIN female outlet (see the 2nd thumbnail image under the main image). You may wish to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor as they are most likely to be able to charge all the way to 4500 psi. The adapter can be found by entering FireHouseDIN in the Search box. (Don’t forget to bring donuts! A little kindness goes a long way.) Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers, or you may be able to locate a good source through them. The adapter can be found by entering PaintBallDIN in the Search box. PLEASE NOTE: This is not a “SCUBA” tank or an “SCBA” tank.

One of the largest charging tanks available in the marketplace, the Air Venturi Carbon Fiber Charging Tank weighs much less than a steel scuba tank. Better yet, the advantage of carbon fiber over steel allows for a higher pressure capability of 4500 psi, meaning more charges for your favorite PCP airgun and more shooting time for you.

Fill your air rifles and pistols with the simple quick-disconnect fitting and be on your way to more pest control, target shooting and even competition. With 4500 psi and a whopping 98 cu. ft. capacity, enjoy the most refills of your 3000 psi airguns. The tank features stainless steel fittings, a 24 in. microbore hose and a rubberized hand wheel for controlled filling. The integrated shock-proof oil filled pressure gauge lets you know when you’re reaching your full charge, and the bleed valve is conveniently located on the side of the main valve.

Even shooting teams will be delighted at the number of fills they get from the Air Venturi Carbon Fiber PCP Charging Station. Averaging more than 40 fills, this tank is a practical choice for many shooting venues. For example, approximately 42 charges are provided on a 3000 psi gun with a 215cc cylinder from a beginning gun reservoir pressure of 1500 psi. You can expect more than 20 full charges on empty 3000 psi gun with a 215cc cylinder. (The total number of fills vary based on the maximum charging capacity and the reservoir size of the gun(s) being charged.)

It includes a Jubilee Gun Charging Valve which incorporates a patented device that automatically restricts the flow rate into the airgun, even if the valve is fully opened, allowing for a slower, safer fill.

This tank has a 5-year retest cycle and a 15-year life cycle.

• 1-Year Limited Warranty
• Carbon fiber filament wound over aluminum bladder
• 98 cu. ft. capacity
• 4500 psi max pressure
• DOT-approved / DOT-SP 11194
• High-pressure valve w/burst disc 7/8′ UNF
• 24 in. microbore hose
• Shock-proof oil filled pressure gauge 0-6000 psi 1/8″ BSPP
• Female quick-disconnect 1/8″ BSPP
• 13.5 lbs. dry weight
• 7″ wide
• 26″ tall to top of valve
• Microbore hose with 1/8 BSPP threads on both ends
• Air Venturi high pressure stainless steel female Foster quick-disconnect adapter at output end of hose
• Valve with built in pressure gauge (eliminates the use of a yoke)
• Seal washer
• Comes assembled and empty